PP Random Copolymer for injection
This high‑gloss homopolymer polypropylene resin is optimized for general‑purpose injection molding. With a melt‑flow rate of 11, M700B delivers prominent rigidity, superior surface gloss and stable processability. It is ideal for household articles, food‑contact containers and plastic housings requiring premium surface finish.
Typical property values for guidance. Certified lot-specific COA provided with every shipment.
| Property | Test Method | Unit | Typical Value |
|---|---|---|---|
| Melt Flow Rate | ASTM D1238 | g/10min | 9-13 |
| Density | ASTM D1505 | g/cm³ | 0.890 |
| Tensile Strength (Yield) | ASTM D638 | MPa | 30 |
| Elongation at Break | ASTM D638 | % | 100 |
| Flexural Modulus | ASTM D790 | MPa | 1100 |
| Notched Izod Impact (23°C) | ASTM D256 | kJ/m² | 4 |
| Rockwell Hardness | ASTM D785 | R scale | 85 |
| Vicat Softening Temperature | ASTM D1525 | °C | 130 |
| Heat Deflection Temperature (0.45 MPa) | ASTM D648 | °C | 90 |
Test condition: 230°C / 2.16 kg for MFR. Values are typical and not intended as specification limits.
Typical end-use applications for M700B — confirmed by mill technical data and converter feedback.
Bubble tea cups, boba cups, and milk tea containers with crystal clarity for beverage service.
Cold drink cups, smoothie cups, and juice containers for foodservice and retail.
Transparent dome lids, flat lids, and straw-hole covers for cup sealing.
Dessert cups, pudding containers, and fruit cups where clarity enhances presentation.
M700B processes on standard equipment. Use the guideline below as a starting point; fine-tune to your specific mold and cycle.
| Melt Temperature | 190 – 230 °C |
| Mold Temperature | 20 – 50 °C |
| Injection Speed | 80 – 120 mm/s |
| Screw Speed | 60 – 100 rpm |
| Drying (if needed) | 70 °C / 1–2 h |
Standard mill packaging protects resin integrity through ocean and inland transit to your destination port.
25kg Bag
1,000 kg bulk bag for high-volume converters seeking reduced packaging waste.
Each shipment includes mill COA, MSDS, packing list, and certificate of origin. Third-party SGS/BV inspection available on request.
Tell us your volume, destination port, and packaging preference. We'll respond within 24 hours with mill-direct pricing and current availability from our mill partners.